3D Printed Neptune Systems Trident Supply Line Bracket - (3 sizes available)

Description

Replacement Trident Supply Line Clip for the Neptune Systems Trident
One of the issues with the stock clip that the Neptune System's Trident comes with is breaking due to the thin walls. This clip features walls that are 2x thicker while still maintaining a low profile in your sump to hold the Trident Supply line securely in place.
Printed out of a Reef safe PETG Material.
PETG is a common plastic used to make recycled plastic bottles
There are 3 Sizes available to choose from:
1. Standard size - for 1/4" (6.35mm) glass
2. 1/2" (12.7 mm) glass
3. 3/4" (19mm) glass
Before placing your order, please verify/double check the glass or acrylic thickness of your sump!!!
Install Directions:
1. Locate an area in your sump with calm water flow.
note: This location should be away from any Dosing pumps, high flow areas, etc. The return chamber where your return pump is located is usually an ideal location
2.
Attach the clip to your sump
3. Using little pressure, secure the trident supply line into the Groove.
4. Once Secured, Verify the supply line is submerged in water and no kinks were
introduced
into the system during installation.
5. (optional) Open your Apex Fusion Dashboard and perform a
Alkalinity
Test. Doing at least 1 test will verify that the supply line is working and no kinks were introduced during installation
Note: I am not affiliated with Neptune Systems or any of the Neptune Systems Trade Marks.
I can also print elongated versions of this if a longer one is desired. Just message me directly and we can discuss the details.